How to set network Epson TM-T82III to USB

CHANGING THE INTERFACE SELECTION 
The interface can be changed through the printer self test. Perform a self test by holding down the feed button whilst powering on the printer. A test page will be printed.


 
The Epson TM-T82III uses menus on the output paper to help us change its settings. To change the interface selection we need to press the feed button in a sequence.   (Note the sequence is different to the TM-T82II).

 
HOLD the feed button for more than 1 second
A numbered menu will print out, titled “Mode Selection”

 
PRESS the feed button 3 times, then HOLD the feed button for more than one second
This menu will print out, “Customize Value Settings”

 
PRESS the feed button 2 times, then HOLD the feed button for more than one second 
This menu will print out, “Interface Settings” 

 
PRESS the feed button 14 times, then HOLD the feed button for more than one second
This menu will print out, “14. Interface Selection”
Mode
0: Return to previous menu
* 1: UIB
2: Built in USB

 
PRESS the feed button the number of times to select the interface mode you want – eg: 2 for ‘built in usb’, then HOLD the feed button for more than one second
This menu will print out, “Saved - you can turn off your printer”

 

BACK